I just has a new right side tie-rod end installed and since then the dash has been doing weird things. Traction control lights flashing on and off, 4x4 on once, tire pressure monitor cycling, anti-theft dash light on, antilock/abs and brake light on. Door locks cycling, battery light briefly on and the radio went dead for about 5 seconds and then back on as normal. Today the clock was out and the shifter position indicator for a short time too. Basically everything on the dash is messed up. Even the gas gauge was showing empty for a time. Then suddenly back to full.
All this has been happening with zero rhyme or reason and totally without pattern. The ground under the driver side door to the frame is clean and attached.
Any grounds or wiring that might have got pinched or detached during the tie-rod end installation? Anything that seems obvious given what I've described above?
I installed a new ignition switch just last year. Not a Dorman model. How likely is it to be failing?
Thanks.
All this has been happening with zero rhyme or reason and totally without pattern. The ground under the driver side door to the frame is clean and attached.
Any grounds or wiring that might have got pinched or detached during the tie-rod end installation? Anything that seems obvious given what I've described above?
I installed a new ignition switch just last year. Not a Dorman model. How likely is it to be failing?
Thanks.