So I've been running a set of LEDs in my fogs for the past year or so. A while back when I had my fuel pump fiasco my fogs stayed turned on no matter if the key was in, started the truck or off and armed with the factory fob. At the time I just pulled the fuse and kept them off that way. Know I want to look into this further since I like my 6 hi mod and just pulled it out because of the fog light situation.
I haven't tried just putting in regular 880 bulbs in there just yet but will to see if in fact it just might be the LEDs are fubar.
I did try disconnecting them(leds) and putting the fuse back in and can hear the relay kick on, so it may be something else.
I did try swapping relays with the same results.
Question: Is it possible that a piece of wire from the 6 hi mode may of fell into the relay slot and crossed the circuit to make it stay on all the time?
If anyone has the schematics and can point me to what I should be testing that would be great.
I haven't tried just putting in regular 880 bulbs in there just yet but will to see if in fact it just might be the LEDs are fubar.
I did try disconnecting them(leds) and putting the fuse back in and can hear the relay kick on, so it may be something else.
I did try swapping relays with the same results.
Question: Is it possible that a piece of wire from the 6 hi mode may of fell into the relay slot and crossed the circuit to make it stay on all the time?
If anyone has the schematics and can point me to what I should be testing that would be great.