Headed up to Brandon's (Blazingtrails) place this past weekend to finally lower the TB. We used the Belltech 795SP kit and lowered the front and rear by 3 inches. We plan on cutting the rear springs an inch next time i'm up at his place to make the wheel gap more flush with the wheel gap in the front. Right now it's sitting a little bit higher than the front. Front is currently sitting at 29 & 1/8th inches from the bottom of the wheel to the fender. Rear is currently sitting at 30 & 3/8th inches from the bottom of the wheel to the fender. I took plenty of pics from this project; hopefully you like the drop as much as I do. Definitely makes the TB looks much more aggressive & sporty. Handles way better too now as well. No more body roll, able to hit corners hard
Plenty of lowered pics:
[sharedmedia=gallery:albums:111]
Pre-Lowered:
Post-Lowered:
And yes of coarse the Bathitch drew blood once again, with Brandon being another victim
View attachment post-12112-14112661374.png
Oh looks it's me, the Batwhore
View attachment post-12112-141124937707.png
View attachment post-12112-141126553885.png
Plenty of lowered pics:
[sharedmedia=gallery:albums:111]
Pre-Lowered:
Post-Lowered:
And yes of coarse the Bathitch drew blood once again, with Brandon being another victim
View attachment post-12112-14112661374.png
Oh looks it's me, the Batwhore
View attachment post-12112-141124937707.png
View attachment post-12112-141126553885.png